This is a device for the remote reading of the water meter and of related variables: backflow, sensor temperature, sensor flooding and tamper detection. Data is acquired remotely via radio communication in the unlicensed 868 MHz band. The device communicates with the sensor and sends data both to IoT networks (Sigfox, LoRaWAN) and to the Mobile meter-reading receiver.
Functional overview: Reading of water meter, detection of operational and alarm conditions via Sigfox, LoRaWAN, Walk/Drive By, on-site reading. Internal memory for 180 data records, remote (OTA) configuration via loT networks.
Alarm states: Leak Permanent flow, Excess flow, Low temperature, Sensor flooded, Tamper Damage to sensor or cabling, Low battery
Compatible water meter types:
SMG Device - I: Itron Flodis, Flostar-M, Aquadis
SMG Device - S: Sensus 420, 612, 620 and other types that allow the sensor to be mounted in the same way.
Sensor connection cable: standard length: 5m, maximum length: 10m
Transmitter dimensions including antenna: 80 x 80 x 230 mm
Weight: 590g (with 5m cable)
Ingress protection: IP68 (maximum depth 5m)
Battery lifetime: 6 years while transmitting 20 times a day to Sigfox/LoRaWAN and every 20 seconds to MOP, batteries can be replaced by the manufacturer
Device lifetime: 12 years
End Product Certificate P_0099_52F3_01
We can provide commercial support in the following countries: Czech Republic, Slovakia
Production capabilities: 1,000-10,000 items
Sample available: Yes
Direct buy link: http://www.iot-water.eu
|Dimensions (in mm)||80 x 80 x 230|
|Sensors||Water flow / Consumption, Pulse, Temperature, Flow, Reed Switch|
|Other supported protocols||LoRa, WMBUS, Bluetooth|
|Battery Life||12 Years|