TruSense Sigfox

The TruSense Sigfox logger is the transmitting part of a 2 part alliance. You must have both the TruSense logger and a TruSense Input-Module for a complete node solution.

Device

Samples

Zones

The TruSense Sigfox logger is designed to interface with Trusense input-modules to create a complete IOT node. Combine this with our dashboard and you have a complete system from sensor to display.  We have a large range of Trusense input-modules so our system can be used by a large range of industries. Trusense input-modules are easy to design so if you have a specific requirement we may be able to help.

Downloadable resources
  • sigfox.pdf

In order to download a datasheet please Sign in or Register

Certification

Status

Not certified yet

Functional

Actionable data

The Trusense Sigfox logger can have one of a large range of Trusense input-modules connected and the data sent to the dashboard will be different depending on the sensors connected to the input-module. If you use a pulse water meter input-module then we can display the water usage and where required send this data off to cover consent requirements. 

Typical number of messages per duration

96/day(s)

Roadmap information

We plan to have available Trusense loggers for all the main IOT platforms and some satellite platforms.  We will be continuously developing more Trusense input-modules as we find new uses and as our clients find new uses for IOT.

Minimum order quantity to custom product

10 products

Business

Availability

Samples

We can provide commercial support in the following countries

Australia, New Zealand

Sample available

Yes

Dedicated process to purchase connectivity

Our Trusense Sigfox logger is tied into our dashboard as the dashboard needs to know what Trusense input-module is connected and what sensors are connected to the input-module.  The data sent from the logger to the dashboard has this information embeded so the end user does not need to do anything.  Also the logger asks the dashboard for time correction information so the logger can maintain a current clock for saving data to the on board SD card for data backup.  

Where to buy ?

Direct buy link: http://www.trusense.io

Through distributors

Warranty duration

1 year(s)

Technical Details

Product casing

Dimensions (in mm): 145 x 66 x 40

IP Code: IP65

Recommended operating temperature: -10° to 70° C

Customizable casing: Yes

Customizable fixation: Yes

Minimum order quantity for custom casing or fixation: 10 products

Sensors
Type

Voltage

Optional - External

Humidity

Optional - External

Light

Optional - External

Pressure

Optional - External

Flow

Optional - External

Pulse

Optional - External

Barometer

Optional - External

Anemometer

Optional - External

Temperature

Optional - External

Ultrasonic

Optional - External

Water flow / Consumption

Optional - External

Sensors information: Our Trusense input-modules will often have multiple sensors within the one input-module. One of our popular input-modules is THP-TS, temperature, humidity and barometric pressure within an outdoor radiation shield.

Protocols
TypeDetails

Sigfox

Dedicated - External

Type: ¼ wave

Battery
Additional Information about the power supply

The Trusense Sigfox logger is available in two forms. Fixed battery unit that uses 2 x 1.5V lithium primary cells. Good for 10+ years at 2 transmissions per day Rechargeable unit that uses 1 x 18500 LiFePO4 battery. solar or mains charged. Good for 15 minute sends or sensors that require more power.

Embedded Software

Flashable Firmware: Yes

External antenna

A connector for an external antenna is available

Information provided on this page is solely under the responsibility of the company who has created and filled the page.