Please be advised that this radio configuration (RC1) is not adapted for United States.
Pressure monitoring of potable water is now easy with the ADR-PRESSURE device from Adroit Technologies. The device can be used for utility and industrial pipe networks or for level measurement in tanks and reservoirs. Through Network download links the unit can be configured for various modes of operation - see attached brochure.
Not certified yet
The ADR-PRESSURE device measure and transmits pressure in bar. Through downlinks various modes can be enabled 1) Simple transmission of min, max and average of samples taken every 30 seconds and transmitted at the rate elected (contract specific). 2) Upper and lower alarm limits set with fixed transmission of min, max and average unless alarm limits breached for a set number of samples, in this case the device can transmit more often until the pressure again returns to normal.
We are flexible around customisation and pressure ranges, as well as product being measured. Please contact us should you have a different requirement to water.
Iran, Islamic Republic Of, Oman, Reunion, Singapore, South Africa
For OEM markets we can sell the device by itself. Protocol to be supplied.
EXW – Ex Works
Dimensions (in mm): 110 x 58 x 30
IP Code: IP67
Recommended operating temperature: -20° to 65° C
Mandatory - External
Dedicated - Internal
Type: PCB printed
Battery life: 1 Years
The battery life is a function of transmissions and temperature. As a rule of thumb the battery life can be estimated to be 50 000 transmissions at 20 degrees celcius. Please consult us for more specific calculations
Sensitivity (in dB): -127
Flashable Firmware: No
A connector for an external antenna is available