Please be advised that this radio configuration (RC1) is not adapted for United States.
RMEC SIGFOX allows supervision of ventilation system (flat blocks, commercial buildings, tertiary buildings).
Economic alternative technology to wire or 3G solutions for supervision or remote meter reading system.
Include an electronic card in the RMEC controller to uplink datas to the SIGFOX network (antenna included).
Measurement of pressure and airflow every hour.
Transmission once per day at fixed hour (average on 24 hours) of pressure and airflow of the ventilation system ( minimum, maximum and average values).
Alarm for minimum pressure or minimum airflow threshold.
Alarm in case of switch off/switch on supply.
Not certified yet
Minimum, average and maximum pressure of the ventilation system per day.
Minimum, average and maximum airflow of the ventilation system per day.
Message when the ventilation system is switched OFF or switch OFF.
Alarm for minimum pressure or minimum airflow threshold configurable by the operating personnel.
RMEC SIGFOX controller is also avalaible plug and play on certain ranges of ventilation units such as JBRB ECOWATT range, casing fans for flat blocks and tertiary buildings, 400°C 1/2h fire certification (C4), functionning at constant airflow, constant pressure, reverse pressure and VAV.
Dimensions (in mm): 200 x 175 x 104
Recommended operating temperature: -20° to 50° C
Dedicated - External
Type: ½ wave
Battery life: 20 Years
Power supply: 230V 50/60Hz
Flashable Firmware: No
A connector for an external antenna is available