Please be advised that this radio configuration (RC1) is not adapted for United States.
This reader uses the IEC62056-21 mode "C" optical data interface available on most billing power meters (note: not to be confused with the metrology flashing LED). The reader can provide actual consumption data as displayed on the meter and also other available data from the meter registers. Up to 13 parameters can be selected for reading.
Installation is absolutely simple, just hang on the meter magnetic target and push to turn on - see video below. Select which parameters to be read-out by downlink, or use model with already pre-selected parameters (series can be customized as applied by your local power distributor). The battery is sufficient for more then 10 years with consumption data once a day. For shorter read-outs (continuous measurments in intervals 15min, 1h, etc.) you can choose USB-C model powered by adapter or powerbank or USB-C model with rechargable battery built in, these USB models come 6/2022.
Using SENSEPARAM.COM portal, you can view, download or send data by callback or email (see demo there). Portal also allows to use end-to-end AES data decryption for models with encryption as consumption data often falls under the category of personal data (households metering). Samples can be purchased on the manufacturer's e-shop.
End Product Certificate P_00B4_C212_01
Consumption data and other parameters provided by particular billing meter (1-13 selectable power meter registers / OBIS codes), each paremeter in a separate message.
Typical read-out parameters (preset in SENSECOM-OMD-E model):
Further models with powering by USB for continuous read-out applications (1h or 15min read-out cycles), availability expected:
5/2022 USB-C powering by adapter or power bank - model OMD-P (including back-up batteries model OMD-PB)
6/2022 USB-C with rechargable battery model OMD-D, expected endurance 6-12 months to the next recharging.
In order to view more detailed commercial information (price, lead time, etc.) for this product, please Sign in or Register
Austria, Belgium, Czech Republic, Denmark, Estonia, Finland, France, Germany, Ireland, Italy, Luxembourg, Malta, Netherlands, Poland, Portugal, Slovakia, Spain, Sweden, Switzerland, United Kingdom, South Africa
There are 2 options:
-SIGFOX connectivity on your own (you would need to have your application to process and visualize data)
-SENSEPARAM portal (allows to view consuption data, charts, download them, send Email/SMS notifications, use callback to your database, apply models with E2E encryption), SIGFOX connectivity is included (we secure your local SIGFOX operator connectivity for non-sample amounts ordered) - see detail at smartimp.com, section data or demo on senseparam.com (tick EN language).
Direct buy link: https://eshop.smartimp.com/
This product is available through distributors.
EXW – Ex Works
Dimensions (in mm): 45 x 68 x 40
IP Code: IP52
Recommended operating temperature: -20° to 60° C
Dedicated - External
Type: ¼ wave
Dedicated - Internal
Type: ¼ wave
Battery life: 10 Years
Battery total Voltage (V): 3.6
Battery total Capacity (mAh): 7.2
OMD model uses 2x LiSOCI2 "A" batteries in parallel connection. OMD-P model designed for USB-C power adapter / powebank and with optional back-up by 2x LiSOCI2 batteries (power supply auto-switching). OMD-D model uses a rechargeable LiPOL battery charged via USB-C (recharge interval 6-24 months).
Sensitivity (in dB): 2
Flashable Firmware: Yes
A connector for an external antenna is available