Impulse or MODBUS data reading, seals detection, temperature or digital inputs monitoring.
To rate or view ratings, please Sign in or Register

Countries adapted for RC1

Commercially available


Made by

Buy this product

SENSECOM-IMD options: 

  • IMD - Impulse readings (S0) for electro (including 2 tarrifs resolution input) and second impulse input (dry-contact) for water, gas or similar meters. Device is suitable for billing meters (galvanic separation 4,5kV with powered optron). Optional - seal detection. DIN rail cover 3U. Powered from mains with short term backup 4h, extendable to 24h.
  • CMD - Data reading (RS232, RS485) with MODBUS, DLMS (MODBUS - selection of registers setup by downlink). Optional seal detection. DIN rail cover 3U. Powered from mains with short term backup 4h, extendable to 24h, eventually powered by battery (RS232 only).
  • SE8 - Electronic seals (up to 8 seals) monitoring for utility service points (meters, current transformers, etc.), DIN rail cover 3U, powered by battery (optionally from mains backed-up by supercap).
  • TR6 - Temperature monitoring with 1-6 NTC thermistors (+/- 1°C), IP65-68 casing 60x80x180, powered by battery
  • DI6 - Digital input monitoring with 1-6 non-voltage (NC/NO) inputs, IP65-68 casing 60x80x180, powered by battery, applicable eg. for water level monitoring by floats

  • Connectable to repeater SENSECOM-WSH for areas with limited radio accessibility (like from metallic cases, shafts, basements, etc.  up to 20m distance) - applicable for IMD, CMD, SE4 types
  • Manipulation/Violation detection (by accelerometer) is built in all types
Downloadable resources
  • SENSECOM IMD Datasheet EN_V4.pdf
  • SENSECOM CMD Datasheet EN_HW24.pdf
  • SENSECOM SE Datasheet EN_FW24.pdf
  • SENSECOM IMT Datasheet EN_V1.pdf
  • SENSECOM DI6 Datasheet EN_V2.pdf

In order to download a datasheet please Sign in or Register



Sigfox Ready

Class 0

End Product Certificate P_00B4_9D45_01



Actionable data

IMD type - you will get information about media consumption (1-2 tarrifs at S0) from 2 channels (S0 and non-voltage), emergency signaling (overusage/leak, outage, schock, optionally seal). Information can be obtained either periodically (default) or on irregularly by passing preset amount of consumption volume from the previous message, or triggered by input signal, eg. change of tarrif or optionally emergency signal from peripherals (seal wire or flood detection). 

CMD type - you will get data from RS232 or RS485 interface sources with MODBUS protocol. Range of read registers can be modified by downlink setup.

SE8 type - you can get alarms in case of equimpent casing violation from 1-8 independant electronic seal wires (eg. power meter and 3 measuring transformers), casing DIN rail 3U, powered by battery (or from mains).

TR6 type - you can monitor temperature, critical changes or crossing limits in up to 6 measured points by NTC 10k thermistors.

DI6 type - you can monitor up to 6 digital non-voltage (NC/NO) inputs changes (alarms).

Typical number of messages per duration


Expected period without human intervention

15 year(s)

Roadmap information

Minimum order quantity to custom product

1000 products


Commercially available
Production capabilities

1,000-10,000 items

Sample available


Dedicated process to purchase connectivity

Remote parameters setting is limited when standalone

Where to buy ?

This product is available through distributors.

Warranty duration

2 year(s)


EXW – Ex Works

Technical Details

Product casing

Dimensions (in mm): 50 x 90 x 80

Weight: 200gr

IP Code: IP20

Recommended operating temperature: -5° to 75° C



Mandatory - Internal


Mandatory - Internal

Gas flow / Consumption

Optional - External

Water flow / Consumption

Optional - External


Optional - External


Optional - External



Dedicated - External

Type: ½ wave


Dedicated - External

Type: ¼ wave


Battery life: 0 Years

Battery type: Replaceable

Additional Information about the power supply

powered from the mains backed-up by supercap, eventually by battery (type dependant)

Product Connectivity

Sensitivity (in dB): 2

Embedded Software

Flashable Firmware: Yes

External antenna

A connector for an external antenna is available


To rate or view ratings, please Sign in or Register

Other products from SmartImp (2)

Similar products

Information provided on this page is solely under the responsibility of the company who has created and filled the page.